Ok lets do another squish in paint.B16 is wait.So squish b17 and b15.The squish results in XR on inc volume.I assign a New P1 on b17.This New P1 does not have acceleration to give us a PP1.It's a Not PP1. http://screencast.com/t/NnQ4cXIVtCw
Because of the wait on dec volume on b16 we fan the rtl again.So with squish results and fan on b16 we have a rtl BO on b16.But what is missing? Ah the T1.No T1 assigned yet.No BO T1 on b17. http://screencast.com/t/wTgX5nK5a7FC
I don't have to do a squish on b19 with b17 to know i have a BM REV because the BM REV is true with or without translation.BM REV on b19.But i do need to do the squish to see what to assign b19 and if i get another EE.After squish i get XR on inc volume and assign another New P1 with acceleration that results in a PP1.So i have a PP1 and a BM REV on b19.The reason to get all the possible EE's on a bar is due to when i start looking at the modian table for turn assignments.So for now i just see what i get on each bar. http://screencast.com/t/9QH6shgIfbD
Wait on b20 leads to required squish on b21.Here's what it would look like before and after in paint (see attachment). http://screencast.com/t/GpnRlsgHTVl
New P1(repeat) on b22.B23 is wait.RTL still in play.So on b24 i will have to do squish process and get result before deciding if BO T1.I will need a XR or XB on dec volume after the squish for a T1 and BO T1. http://screencast.com/t/3Cb5zYdv5U
Here's the before and after the squish (done in paint see attachment) for B24 and b22. The squish results in another sym on dec volume so is another wait. http://screencast.com/t/kQuUhZa9oR2
Because b24 is another wait after the squish i fan the rtl.Here's what the chart would look like with the fan. Notice i'm at lat 3 so if i get retro then b23 and b24 element assignments will change. http://screencast.com/t/SaTB9bKwS
Whole day.Carryover at New P1(repeat) down. On alert at open for PP1. http://screencast.com/t/wkIl53BQyoka