Build Your Own - Step by Step ( i7 2600k)

Boli, this is what I found for now. It's the cheapest available if you're in a rush. The reviews are a little iffy.

http://www.amazon.com/Western-Digit...4?s=electronics&ie=UTF8&qid=1313434290&sr=1-4

This is the other deal:

http://www.microcenter.com/single_product_results.phtml?product_id=0361177

However, if you are willing to wait, I can try and get you one for under $100 with FREE shipping (that's with out rebates).

Btw, do you do rebates

 

Sure I do rebates. Sometimes. Sure I can wait. This is a back-burner project.

It would be great if I can buy through Amazon because I have shopping credits with them through my credit card. Thanks Sam!

 

Boli, if you can do 2 HDD, then this is a pretty good deal and these Seagate Barracudas tend to have pretty good reviews.

In this case, you would get 4TB for $129.98. Direct sale; no need to deal with rebates.

http://www.microcenter.com/single_product_results.phtml?product_id=0334239

 

Ah... interesting. I should be able to do a virtual volume to combine the 2 disks. Or maybe I will buy one now and wait for the second one to come down in price in a year. Thanks for the link!

 

AI Suite II overview

Good info

This is the same suite I currently use.


Asus Suite ll Overview

 

Virtual Box

http://www.virtualbox.org/

From the Guide:


1.7 Creating your first virtual machine




Click on the “New” button at the top of the VirtualBox Manager window. A wizard will pop up
to guide you through setting up a new virtual machine (VM):
On the following pages, the wizard will ask you for the bare minimum of information that is
needed to create a VM, in particular:
1. The VM name will later be shown in the VM list of the VirtualBox Manager window, and
it will be used for the VM’s files on disk. Even though any name could be used, keep in
mind that once you have created a few VMs, you will appreciate if you have given your
VMs rather informative names; “My VM” would thus be less useful than “Windows XP SP2
with OpenOffice”.
2. For “Operating System Type”, select the operating system that you want to install later.
The supported operating systems are grouped; if you want to install something very unusual
that is not listed, select “Other”. Depending on your selection, VirtualBox will enable
or disable certain VM settings that your guest operating system may require. This is particularly
important for 64-bit guests (see chapter 3.1.2, 64-bit guests, page 42). It is therefore
recommended to always set it to the correct value.

 

select Ram amount

3. On the next page, select the memory (RAM) that VirtualBox should allocate every time
the virtual machine is started. The amount of memory given here will be taken away from
your host machine and presented to the guest operating system, which will report this size
as the (virtual) computer’s installed RAM.
Note: Choose this setting carefully! The memory you give to the VM will not be
available to your host OS while the VM is running, so do not specify more than you can
spare. For example, if your host machine has 1 GB of RAM and you enter 512 MB as
the amount of RAM for a particular virtual machine, while that VM is running, you will
only have 512 MB left for all the other software on your host. If you run two VMs at
the same time, even more memory will be allocated for the second VM (which may not
even be able to start if that memory is not available). On the other hand, you should
specify as much as your guest OS (and your applications) will require to run properly.
A Windows XP guest will require at least a few hundred MB RAM to run properly, and
Windows Vista will even refuse to install with less than 512 MB. Of course, if you want to
run graphics-intensive applications in your VM, you may require even more RAM.
So, as a rule of thumb, if you have 1 GB of RAM or more in your host computer, it is usually
safe to allocate 512 MB to each VM. But, in any case, make sure you always have at least
256 to 512 MB of RAM left on your host operating system. Otherwise you may cause your
host OS to excessively swap out memory to your hard disk, effectively bringing your host
system to a standstill.
As with the other settings, you can change this setting later, after you have created the VM.

 

Create Hard Disk for VM


4. Next, you must specify a virtual hard disk for your VM.
There are many and potentially complicated ways in which VirtualBox can provide hard
disk space to a VM (see chapter 5, Virtual storage, page 74 for details), but the most
common way is to use a large image file on your “real” hard disk, whose contents VirtualBox
presents to your VM as if it were a complete hard disk. This file represents an entire hard
disk then, so you can even copy it to another host and use it with another VirtualBox
installation.
The wizard shows you the following window:
Here you have the following options:

1 First steps
 To create a new, empty virtual hard disk, press the “New” button.
 You can pick an existing disk image file.
The drop-down list presented in the window contains all disk images which are currently
remembered by VirtualBox, probably because they are currently attached to a
virtual machine (or have been in the past).
Alternatively, you can click on the small folder button next to the drop-down list to
bring up a standard file dialog, which allows you to pick any disk image file on your
host disk.
Most probably, if you are using VirtualBox for the first time, you will want to create a new
disk image. Hence, press the “New” button.
This brings up another window, the “Create New Virtual Disk Wizard”, which helps you
create a new disk image file in the new virtual machine’s folder.
VirtualBox supports two types of image files:
 A dynamically allocated file will only grow in size when the guest actually stores
data on its virtual hard disk. It will therefore initially be small on the host hard drive
and only later grow to the size specified as it is filled with data.
 A fixed-size file will immediately occupy the file specified, even if only a fraction of
the virtual hard disk space is actually in use. While occupying much more space, a
fixed-size file incurs less overhead and is therefore slightly faster than a dynamically
allocated file.
For details about the differences, please refer to chapter 5.2, Disk image files (VDI, VMDK,
VHD, HDD), page 76.
To prevent your physical hard disk from running full, VirtualBox limits the size of the image
file. Still, it needs to be large enough to hold the contents of your operating system and the
applications you want to install – for a modern Windows or Linux guest, you will probably
need several gigabytes for any serious use:
After having selected or created your image file, again press “Next” to go to the next page.
5. After clicking on “Finish”, your new virtual machine will be created. You will then see it
in the list on the left side of the Manager window, with the name you entered initially.

 

Disk Size

 

1.8.1 Starting a new VM for the first time


When a VM gets started for the first time, another wizard – the “First Start Wizard” – will
pop up to help you select an installation medium. Since the VM is created empty, it would
otherwise behave just like a real computer with no operating system installed: it will do nothing
and display an error message that no bootable operating system was found.
For this reason, the wizard helps you select a medium to install an operating system from.
 If you have physical CD or DVD media from which you want to install your guest operating
system (e.g. in the case of a Windows installation CD or DVD), put the media into your
host’s CD or DVD drive.
Then, in the wizard’s drop-down list of installation media, select “Host drive” with the
correct drive letter (or, in the case of a Linux host, device file). This will allow your VM to
access the media in your host drive, and you can proceed to install from there.
 If you have downloaded installation media from the Internet in the form of an ISO image
file (most probably in the case of a Linux distribution), you would normally burn this file
to an empty CD or DVD and proceed as just described. With VirtualBox however, you can
skip this step and mount the ISO file directly. VirtualBox will then present this file as a CD
or DVD-ROM drive to the virtual machine, much like it does with virtual hard disk images.
For this case, the wizard’s drop-down list contains a list of installation media that were
previously used with VirtualBox.
If your medium is not in the list (especially if you are using VirtualBox for the first time),
select the small folder icon next to the drop-down list to bring up a standard file dialog,
with which you can pick the image file on your host disks.
In both cases, after making the choices in the wizard, you will be able to install your operating
system.