What IP to ping for Zenfire feed ?

Discussion in 'Trading Software' started by fluttrader, Jun 7, 2008.

  1. What IP I have to ping to see how good my connection is to the Zenfire feed ?
     
  2. jtnet

    jtnet

    bump to this IB is: gw1.ibllc.com
     
  3. I have Sygate fw so I can ping via one of its logs -
    which broker are you using ? - isn't there ping sw
     
  4. Can you elaborate ?
     
  5. will post some info tomorrow when the mkts are open
     
  6. fluttrader, don't actually know much about the subject, but
    wouldn't the route keep changing, or each time a trace is done

    I used the Sygate Tracking Log to trace ET, about 700ms, it's just
    a matter of clicking on the entry, either a name or address then
    Backtrace and WhoIs if wanted
    think most firewall would have a Ping/Trace utility otherwise

    google: software to ping isp free
    http://www.filedudes.com/files/Ping_Isp_Logoff.html

    plus there's various realtime monitoring sw
     
  7. Alinghy

    Alinghy

    What IP I have to ping in order to check my connection with Zen-Fire feed ?

    Clearly I need a pingable IP, i.e. a Zen-Fire proxy IP.

    My broker is Proactive

    many thanks in advance

    :D
     
  8. prabu

    prabu

    i tried ping test here
    whoisxy.com
    my results are
    Reply from 173.203.189.224: bytes=32 time<1ms TTL=128
    Reply from 173.203.189.224: bytes=32 time<1ms TTL=128
    Reply from 173.203.189.224: bytes=32 time<1ms TTL=128
    Reply from 173.203.189.224: bytes=32 time<1ms TTL=128
    Ping statistics for 173.202.190.224:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
     
  9. auspiv

    auspiv

    <1ms.. yeah right.. you're probably pinging your own router or something similar